Sidebar Sidebar Sidebar
sale
High-cycle vibrators are used with low-slump concrete where consistent power is needed to work a stiff mix into corners, around rebar and remove entrapped air pockets. These vibrators use a three-phase motors at 180 cycles and require a special generator capable of generating 180 cycles. The benefit is these vibrators retain 95% of their power under load.
High-cycle vibrators are used with low-slump concrete where consistent power is needed to work a stiff mix into corners, around rebar and remove entrapped air pockets. These vibrators use a three-phase motors at 180 cycles and require a special generator capable of generating 180 cycles. The benefit is these vibrators retain 95% of their power under load.

Multiquip #FXA50A4 - Vibr-Hi Cycle 2 diam. 13 hose

(No reviews) Write a Review
$2,218.00
$1,893.00
SKU: FXA50A4
Weight: 38.00 LBS
Shipping: $156.00 (Fixed Shipping Cost)
Adding to cart… The item has been added
Multiquip #FXA50A4 - Vibr-Hi Cycle 2 diam. 13 hose

Multiquip #FXA50A4 - Vibr-Hi Cycle 2 diam. 13 hose

$2,218.00
$1,893.00
Description  

Multiquip #FXA50A4 - Vibr-Hi Cycle 2 diam. 13 hose

See: Multiquip Concrete Vibrators Brochure

See: Multiquip Concrete Vibrator Handbook
High-cycle vibrators are used with low-slump concrete where consistent power is needed to work a stiff mix into corners, around rebar and remove entrapped air pockets. These vibrators use a three-phase motors at 180 cycles and require a special generator capable of generating 180 cycles. The benefit is these vibrators retain 95% of their power under load.
Features
  • Powered by a 4.5-amp electric motor
  • Permanently lubricated oversized head bearings for unmatched durability
  • Hose can be extended to 45 feet (13.5 meters)
  • Waterproof control box
  • Optional 50- and 100-foot (15, 30 meters) extension cords available
  • Requires high-cycle generator GDP5H

Customers Also Viewed

!